Linen / Cotton / Hemp Print Care
*Spot clean only with mild soap and water solution.
Our performance wovens are fade-resistant and easy to clean for worry-free living indoors or out.
Most stains can be cleaned up with a mild soap and water solution.
*Spot wash by sponging briskly with a solution of natural soap in lukewarm water.
*Rinse thoroughly with clean water to remove soap and air dry.
*For stubborn stains, use fabric spot remover. Follow the directions on the container.
*For removable cushion covers, machine wash in cold water with a mild soap, then air dry.
*Our acrylic does not promote mildew growth. However, mildew may grow on dirt and other foreign substances that are not removed from the fabric. To clean mildew stains, prepare a mild solution of one cup bleach and two capfuls of natural soap per gallon of water. Spray on entire area and allow to soak in. If necessary, scrub vigorously with sponge and clean rag. Sponge thoroughly with clean water and air dry.
Indoor/Outdoor Woven test
Abrasion (ASTM D4157): #10 Cotton Duck: 12,000 double rubs
Seam Slippage (ASTM D4034) – Min. 25 lbs. Warp: 79.0 Fill: 77.3
Tensile Strength (ASTM D1682) – Min. 50 lbs Warp: min. 50 Fill: min. 50
Tear Strength (ASTM D2262) - Min. 6 lbs Warp: min. 6 Fill: min. 6
Elongation (ASTM D5034): Warp: min 1% / max 5% Fill: min 1% / max 5%
Lightfastness (ASTM D3597): min. Class 4 at 2200 hours
Brush Pill (ASTM D3511): Class 2.0
CAL-TB 117-2013: PASS
U.F.A.C./N.F.P.A. 260: Not Tested
Dry Crocking (ASTM D3597): Class 5
Wet Crocking (ASTM D3597): Class 5
Contents: 100% Acrylic
Characteristics: Mildew resistant, fade resistant, water repellent
Our indoor/outdoor prints are fade-resistant and easy to clean for worry-free living.
*Hand Wash Normal or delicate machine wash cycle at 30 degrees Celsius
*Do Not Tumble Dry
*Iron (on reverse only) – low temp.
*For stubborn stains – use half and half bleach/water solution and a very soft brush on the back of the fabric. As the print is on the face of the fabric – please do not brush the face.
*Fabrics are soil-resistant, oil and water repellent with Teflon finishing
Outdoor Print test
Composition: 100% polyester yarns
Breaking Load (UNI EN ISO 13934-1): Warp: 2700 / 48.5% Weft: 920 / 31.0%
Impermeability (UNI EN 24920): Water repellent
Abrasion/Martindate (UNI EN ISO 12947-2): >40,000
Sewing/Resistance (UNI EN ISO 13936-2): Warp: 180 N / 8.0 Weft: 180 N / 2.2
Pilling/ Modified Martindale (UNI EN ISO 12945-2): class 5 / A 2,000 Cycles
Color fastness to artificial light fading lamp test (UNI EN ISO 105-B 02): ≥7 degree